Share :
Oil and Grease analyzer LOGA-A10 is a tabletop unit designed with dismountable integrated optical system and electrical modulation source. It has a sample testing range of 0.12 mg/L to 100 mg/L and measurement limit of 0.12 mg/L. Equipped with self-contained electrical and optical system and lock-in amplifier circuit for signal sensor. Integrated with hard disk to save test data and spectrograms. Features auto reset and regression equation calculation function.
Available Range :
Measurement Range : 0.12 to100 mg/L| Measurement Range | 0.12 to100 mg/L |
| Measurement Limit | < 0.12 mg/L |
| Max. Measured Concentration | 64000 mg/L |
| Repeatability | ≤1 % |
| Environmental temperature | 5 °C to 35 °C |
| Environmental humidity | 20 % to 80 % RH |
| Linearity | R ≥ 0.999 |
| Wave number range | 3400 cm-1 to 2400 cm-1 |
| Absorbance range | 0.0000 to 3.000 AU |
| Power supply | 220 V ± 22 V / 50 Hz ± 1 Hz 35 VA |
| Dimension (L × W × H) | 550 × 380 ×150 mm |
| Weight | 15 kg |
- Uses Infrared spectroscopy principle for sample analysis
- Dismountable integrated optical system with good stability and high SNR
- Electrical modulation that reduces the intensity of the heat source to facilitate system cooling
- Sensor signal with lock in amplifier circuit thus improves the analyzer’s SNR
- Can be used as an infrared spectrophotometer
- Carbon tetrachloride can be replaced by tetrachlorethylene extraction agent
- Self-contained optical system and electrical system
- High speed measurement, just takes 30 seconds to finish a test
- Built-in auto reset and regression equation calculation function
Oil and Grease analyzer is widely used to monitor oil content of surface water, ground water, industrial effluent, and oil content of solid.
Popular Products
Navigation
Contact Us Map