Share :
Water Purification System LWPS-C11 is top choice of high flux ultrapure water system from tap to ultrapure water, integrating pretreatment, RO and terminal filter into one. Its output ranges up to 90 liters/hour and offers flow rate up to 2 liters/minute (when tank is full). Features with tap water inlet, it can produce second stage RO water and EDI module, center EDI ultrapure water system. The 2nd stage RO water’s conductivity can stay 1 to 5 µs/cm, and the ultrapure water’s resistivity is more absolutely to 18.2 MΩ.cm. It completely meets the highest grades and offers ASTM standards. Designed with 7.0 inch touch LCD display, to detect the quality of 3 way water sensor, 2 way flow sensor ultrapure water. Equipped with Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF. It is auto self-flushing of RO membrane function, extend RO membrane life.
Available Range :
Water quality : One stage (Type I) Water quality : Two stage(Type III and type I) Output 2nd stage RO water : 90 liters/hour Output 2nd stage RO water : 90 liters/hour| Output 2nd stage RO water | 90 liters/hour |
| Output ultrapure water | Up to 2 liters/minute (when tank is full) |
| Ultrapure Water Quality | Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: <0.1 cfu/ml Particle (>0.2 µm): <1/ml Endotoxin: <0.001EU/ml RNases: <1pg/ml DNases: <5pg/ml |
| EDI | Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 % |
| RO Water Quality | Conductivity 1st stage RO water: Feed water Conductivity ×5 % Conductivity 2nd stage RO water: 1 to 5 µs/cm |
| Feed water requirements | Tap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm2 |
| Dimension | 610 × 585 × 1580 mm |
| Power Consumption | 480 W |
| Power Supply | AC110 to 240 V, 50/60 Hz |
| Weight | about 75 kg |
| Standard configuration | Main body (Including 1 set of cartridge) +20 liters Pressure Tank and 20 liters pressure tank |
- Water Purification is unique and easy-to-install prefiltration pack system
- Integrate with EDI module, without softener, chemical regeneration and replacing any DI cartridge
- Self-maintenance of the reverse osmosis membrane
- The system recirculates water when the system is not in use in order to maintain water quality
- Built in 20 liters Pressure Tank and 20 liters plastic pressure water tank
- Designed with graphic display clearly indicates all parameters
- 3 doors and easy to replacing cartridge design, convenient to maintain system and replace cartridges
- RO module with DOWs membrane, ensure long life, stable operation and high desalinization rate
- Designed with multiple alarm function
- Offers data storage and RS 232/USB communication port
- Equipped with range of filters and cartridges are available for the system to match your water requirements of bacteria-free, pyrogen-free or nuclease-free
- Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF
- Easy to maintain and operate
Type I and Type III Water Purification System
Type I and Type III Water Purification Systems are designed to provide exceptional water quality across various applications. They utilize advanced double-pass RO technology to efficiently produce both Type I and Type III water from tap water. These are available in diverse tank capacities for convenient water storage. They incorporate intuitive displays for monitoring water parameters and include programmed alarms for water shortage protection. Our water purification system maintains ultra-low total organic carbon (TOC) levels for sensitive industrial and laboratory processes.
Type I and Type III RO Water Purification System LOTW-B10
- Output of Pure water
- ≥ 10 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B12
- Output of Pure water
- ≥ 30 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B13
- Output of Pure water
- ≥ 40 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 80 L
Type II Water Purification System
We manufacture high-quality Type II Water Purification System with various capacities for convenient water storage. The units are designed as benchtop models, offering a compact and efficient solution for laboratory environments. They feature both advanced single-pass and double-pass reverse osmosis systems. They are equipped with an anti-fouling RO membrane prevention program and microfilter membranes for the effective removal of pollutants. Our models offer an intuitive display for user-friendly operations.
Type II Water Purification System LTWP-B10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-B11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-B12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-B13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type III Water Purification System
Our Type III Water Purification Systems are designed to provide reliable and high-quality Type III water suitable for various laboratory and industrial applications. These are available in both double-pass and single-pass reverse osmosis (RO) configurations. The double-pass RO system involves two stages of filtration to achieve superior purification. The systems feature an anti-fouling RO membrane prevention program. An intuitive LCD is integrated into the systems, enabling real-time monitoring of operational parameters. Additionally, they offer ease of cleansing, disinfecting, and draining wastewater, along with micro filter membranes to remove pollutants.
Type III Water Purification System LHWP-B10
- Output of Pure water
- ≥ 10 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-B11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-B12
- Output of Pure water
- ≥ 30 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-B13
- Output of Pure water
- ≥ 40 L / hr.
- Water Type
- Type III
- Configuration
- Floor Standing
Radio Frequency Identification Water Purification System
Labtron Radio Frequency Identification Water Purification System incorporates high-quality RFID chip integration for efficient component tracking. These are offered in both single-pass and double-pass reverse osmosis configurations to ensure excellent water quality with high recovery rates. Our advanced water purification systems include different tank capacities to provide ample storage. They feature intuitive LCDs for monitoring water pressure and operational parameters.
Radio Frequency Identification Water Purification System LRFW-B10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System LRFW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System LRFW-B12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System LRFW-B13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Double Pass RO system
- Configuration
- Floor standing
UV Water Purification System
Discover our wide range of UV Water Purification System for effective removal of contaminants with exceptional efficiency. The integrated UV sterilizer eliminates the microorganisms and maintains water purity at a TOC level. The programmed water shortage protection alarms enhance reliability by alerting users to potential issues. These systems feature easy-to-replace filters and online monitoring of water resistance. The integrated deionization cartridge in the double pass system ensures comprehensive purification, delivering consistently high-quality water for critical applications.
UV Water Purification System LUVW-B10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
UV Water Purification System LUVW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
UV Water Purification System LUVW-B12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
UV Water Purification System LUVW-B13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Double Pass RO system
- Configuration
- Floor standing
Water Purification System (Feed-specific)
Our Water Purification Systems (Feed-specific) are designed to purify water from specific sources or with specific characteristics. They feature advanced technologies to ensure high water purity for laboratories and industrial applications. These equipment features advanced filtration technologies such as activated carbon, reverse osmosis, ultrafiltration, and UV sterilization to eliminate a wide range of contaminants. The automated controls ensure consistent water quality by adjusting purification processes as needed. They utilize specialized flow design for maintaining stable water quality. Our feed-specific water purification systems ensure efficient removal of impurities and maintain high water quality for diverse applications.
Water Purification System LWPS-A10
- Water quality
- One stage (Type I)
- Feed water
- RO water /Distilled water Water temperature: 5 ~ 40℃
- Resistivity
- 18.25 MΩ.cm @ 25 ℃
Water Purification System LWPS-A11
- Water quality
- Two stage(Type III and type I)
- Feed water
- Tap waterTDS≤400ppm Water temperature: 5-40℃ Type 3 water ≥10L/h
- Conectivity
Water Purification System LWPS-C10
- Output 2nd stage RO water
- 90 liters/hour
- Output ultrapure water
- Up to 2 liters/minute (when tank is full)
- Ultrapure Water Quality
- Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
Deionized Water System
Our Deionized Water System features advanced purification technologies such as ion exchange, reverse osmosis, and filtration to remove contaminants effectively. They provide microcomputer control with electronic pressure sensors for optimal operation. These are crafted from durable polypropylene to prevent rust and maintain cleanliness. They feature double-wavelength UV lamp modules and double-layer PES terminal disinfection filters to ensure sterile water output. Our deionized water system includes an LCD screen for continuous water quality monitoring.
Deionized Water System LDIN-A10
- Output
- 30 liters/hour
- Flow rate
- Up to 2 liters/minute (with pressure tank)
- Pure water outlet
- 2 reverse osmosis water, deionized water
Deionized Water System LDIN-A20
- Output
- 30 liters/hour
- Flow rate
- Up to 2 liters/minute (with pressure tank)
- Pure water outlet
- 2 reverse osmosis water, deionized water
Popular Products
Navigation
Contact Us Map