info@labtron.info

Testing Instruments

Whiteness and chromaticity tester TP-A10

Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Measurement mode : Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C *
Stability : ≤ 0.1 within 30 min
Accuracy : Chromaticity co-ordinate 0.0001

Add to compare Catalog

Whiteness meter TP-A11

Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
System : D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm
Light source : D65 as illuminating source
Zero drift : ≤ 0.1 %

Add to compare Catalog

Tensile Stiffness Tester TP-B10

Sample (size) length : 38×70 mm
Measuring range : (1-500) mN.m (divided into 7 small ranges)
Indication error : 0.02
Test speed : (200° ± 20°)/ min

Add to compare Catalog

Automatic horizontal tensile tester TP-B11

Sample (size) length : 90 to 200 mm
Sample width : 15 mm, 25 mm, 50mm
Measuring range : 0 to 30, 0 to 100 N,0 to 300 N
Accuracy : ± 1 %

Add to compare Catalog

Automatic horizontal tensile tester TP-B12

Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
Sample width : 15 mm
Measuring range : 0 to 30, 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N
Accuracy : ± 1 %

Add to compare Catalog

Vertical tensile tester TP-B20

Sample (size) length : 0 to 200 mm adjustable
Sample width : 15 mm
Measuring range : 0 to 30 N (tissue paper), 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N
Accuracy : ± 1 %

Add to compare Catalog

Pulp beating (refining) freeness tester TP-C10

Measurement range : 0 to 100° SR
Sealed testing speed : 100 ± 10 mm/s
Volume of distilled water : 1000 ± 5 ml
Draining time : 149 ± 1 s

Add to compare Catalog

Water absorption tester TP-C20

Measurement range : 0 to 200 mm
Specimen size : 15×250 mm
Division value : 1 mm
Number of specimen holders : 5

Add to compare Catalog

Water absorption tester- Cobb Tester TP-C21

Metal Cylinder inner area : (100 ± 0.2) cm2
Metal Cylinder height : 50 mm
Metal roller width : (200 ± 0..5) mm
Metal roller weight : (10 ± 0.5) kg

Add to compare Catalog

COBB sample cutter TP-C30

Sample diameter : 125 mm
Sample error : ± 0.2 mm
Sample Thickness : 0.1 to 1.0 mm
Dimension : 240×288×435 mm

Add to compare Catalog

Coefficient of friction tester TP-D10

Measurement range : 0.01 to 10 N
Slider weight : 200 g
Slider size : 63×63 mm
Testing accuracy : ± 2 %

Add to compare Catalog

Electronic bending stiffness tester TP-E10

Testing speed : 200° ± 20° / min
Test range : 1 to 10000 mN
Indicating Error : ± 1 %
Testing length : 5, 10, 15, 20, 25, 50 mm

Add to compare Catalog

Paper and cardboard thickness meter TP-E20

Measuring range : 0 to 4 mm
Accuracy : 0.01 or 0.001 mm
Gauge : Analogue gauge display
Contact pressure (to create false weight) : 100 ± 10 kPa

Add to compare Catalog

Paper and cardboard thickness meter TP-E21

Measuring range : 0 to 20 mm
Accuracy : 0.01 mm
Gauge : Analogue gauge display
Contact pressure (to create false weight) : 20 ± 0.5 kPa

Add to compare Catalog

Ink rubber tester TP-F10

Sample size (L*B) : 230×50 mm (can join short samples together)
Rub pressure : 20 ± 0.2 N
Friction speed : 43 times / min
Friction area (L*B) : 155×50 mm

Add to compare Catalog

Standard strip cutter TP-G10

Sample width : 15 mm
Sample maximum length : 300 mm
Parallelism : ≤ 0.1 mm
Dimension : 240×520×70 mm

Add to compare Catalog

Softness tester TP-H10

Measuring range : 10 to 1000 mN
Division value : 1 mN
Accuracy : ± 1%
Indicating Error : ≤ 0.5

Add to compare Catalog

Carton compression tester TP-I10

Measuring range : 0.1 to 10 kN
Indication error : < ± 1%
Platen Size : 500×500 mm (customized)
Operating stroke : 500 mm (customized)

Add to compare Catalog

Carton compression tester TP-I11

Measuring range : 1 to 50 kN
Indication error : < ± 1%
Platen Size : 800×800 mm/ 1000×1000 mm/ 1200×1200 mm/ 1500×1500 mm (customized)
Operating stroke : 800 mm/ 1000 mm/ 1200 mm/ 1500 mm (customized)

Add to compare Catalog

Paper air permeability tester TP-J10

Measuring range : 0 to 1000 ml/min
Test area : 10 ± 0.02 cm2
Area differential pressure : 1 ± 0.01 kPa
Inner diameter of grip ring : 35.68 ± 0.05 mm

Add to compare Catalog

Internal Ply bond Tester TP-J11

Capacity : A: 20 to 500 J/m2 B: 500 to 1000 J/m2
Impact angle : 90°
Unit : Lb-ft/in2 J/m2
Error : A: ± 1 J/m2 B: ± 2 J/m2

Add to compare Catalog

Puncture strength tester TP-J12

Measuring range : A (1 to 6) J indicating error ± 0.05 J B (1 to 12) J indicating error ± 0.05 J C (1 to 24) J indicating error ± 0.05 J D (1 to 48) J indicating err
Frictional resistance :
Pyramid dimension : Three sides: 60×60×60 mm, height 25 ± 0.7 mm, Arris edge fillet radius 1.5 ± 0.1 mm
Dimension : 800×470×840 mm

Add to compare Catalog

Paper tearing tester TP-J20

Measuring range : 0 to 1000 mN
Resolution : 0.1 mN
Indication error : ± 1 %
Tearing arm : 104 ± 1 mm

Add to compare Catalog

Electronic Tearing tester TP-J21

Capacity : 10 -16000 mN
Resolution : 0.1 mN
Tearing arm : 104 ± 1 mm
Tearing angle : 27.5° ± 5°

Add to compare Catalog

Mullen burst tester TP-K10

Measurement range : 0 to 5600 kPa
Accuracy : ± 0.5 % F.S.
Compression speed : 170 ± 15 ml/min
Clamp pressure : ≥ 690 kPa

Add to compare Catalog

Mullen burst tester TP-K11

Measurement range : 0 to 1600 kPa
Accuracy : ± 0.5 % F.S.
Compression speed : 95 ± 5 ml/min
Clamp pressure : ≥ 430 kPa

Add to compare Catalog

Crush tester TP-L10

Measurement range : 5 to 500 N, 50 to 3000 N
Resolution : 1 N
Accuracy : ± 1 %
Variability : ≤ 1 %

Add to compare Catalog

Bekk Smoothness tester TP-L20

Measuring scope : ( 1 to 9999) s, divided in to (1 to 15) s, (15 to 300) s, (300 to 9999) s, the automatic (no. more than 200 s)
Accuracy : ±0.1 s within 300 s
Vacuum system volume (ml) : Bigger volume: 380 ± 1 Smaller volume: 38 ± 1
Contact pressure : 100 ± 2 kPa

Add to compare Catalog

Folding endurance tester TP-M10

Measuring scope : 0 to 99999 s
Folding angle : 135° ± 2°
Tensile scope : 4.9 to 14.7 N
Folding head suture size : 0.25 mm, 0.50 mm, 0.75 mm, 1.00 mm

Add to compare Catalog

Aging Oven TAO-A10

The maximum temperature : 300°C
Temperature fluctuation : Within ± 0.5°C
Temperature uniformity : Within ± 1°C
Rotate speed of the turntable : 11 r/min to 12r/min, turntable dimension diameter: 285 mm

Add to compare Catalog

Charpy/ Izod Impact Tester TCI-A10

Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
Impact energy (Izod) : 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Resolution of impact energy : 0.001 J
Pendulum up angle : 160°

Add to compare Catalog

Melt flow Indexer TMFI-A10

Measuring range : 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
Measuring rate : 0.001 S
Temperature range : 50 to 400°C
Temperature precision : ± 0.5°C

Add to compare Catalog

Melt flow Indexer TMFI-A11

Measuring range : 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
Measuring rate : 0.001 S
Temperature range : 50 to 400°C
Temperature precision : ± 0.5°C

Add to compare Catalog

Vacuum Leak Tester TVLT-A10

Vacuum degree : 0 to 90 KPa
Accuracy : 1 % FS
Resolution : 0.1 KPa
Vacuum chamber effective size : 270 × 210 mm

Add to compare Catalog

Oxygen Index Tester TOIT-A10

Resolution : 0.1 % O2
Measuring range : 0 to 100 % O2
Precision : ± 0.4 % O2
Response time : < 10 S

Add to compare Catalog

Falling Weight Impact Tester TFWT-A10

Temperature range : 10 to 35°C
Maximum falling height : 2000 mm
Resolution of displacement : 1 mm
Height error : < ± 2 mm

Add to compare Catalog

Primary adhesive tester TPAT-A10

Inclined adjustable angle : 0 to 40°
Panel width : 120 mm
Test area width : 80 mm
Standard steel balls : 1/32 to 1 inch

Add to compare Catalog

Lasting adhesive tester TLAT-A10

Standard roller : 2000 ± 50 g
Testing stations : 3
Dimension (L*W*H) tester : 320×210×550 mm (3 stations)
Weight for stations : 10 kg (3 stations)

Add to compare Catalog

Lasting adhesive tester TLAT-A11

Standard roller : 2000 ± 50 g
Testing stations : 6
Dimension (L*W*H) tester : 650×210×550 mm (6 stations)
Weight for stations : 15 kg (6 stations)

Add to compare Catalog

Heat sealer THS-A10

Seal temperature : Room temperature -250°C
Control accuracy : ± 0.2°C
Dwell time : 0.1 S to 999.9 S
Dwell pressure : 0.05 to 0.7 MPa

Add to compare Catalog

Vicat softening temperature & HDT machine TVHT-A10

Operating temperature : Ambient temperature to 300°C
Heating rate : 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min)
Maximum temp. error with heating speed : ± 5°C under 50°C/ h, ± 1°C under 120°C/ h
Range of deformation : 0 to 10 mm

Add to compare Catalog

No rotor rheometer TNRR-A10

Temperature tester : Room temperature to 200°C
Temperature display resolution : 0.1°C
Temperature control accuracy : ≤ ± 0.3°C
Rotor speed : 100 times/ min

Add to compare Catalog

Mooney viscometer TMV-A10

Control temperature range : Normal temperature to 200°C
Temperature display resolution : 0.01°C
Temperature control accuracy : ± 0.3°
Calibration accuracy : Mooney value ± 0.5

Add to compare Catalog

Rubber low temperature brittleness tester TRBT-A10

Temperature range : -60°C to 0°C
Temperature accuracy : ± 0.5°C
Impact speed : 2 m/s ± 0.2 m/s
Temperature fluctuation :

Add to compare Catalog

DIN abrasion tester TDAT-A10

Test arm weight : 2.5 N
Additional Loads : 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,
Idler : 150 mm
Abrasion stroke : 40 ± 0.2 M

Add to compare Catalog

Rubber-weiss plasticity testing machine TRWM-A10

Temperature range : RT 50° to 300°
Temperature accuracy : ± 1°
Measuring range : 0.01 to 25 mm
Accuracy : ± 0.01 mm

Add to compare Catalog

Three roll mill machine TRMM-A10

Mixed capacity : 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg
Temperature range : RT to 300°C
Temperature control system : PID control
Display : LED display

Add to compare Catalog

Rubber Low Temperature Brittleness Tester TRBT-A11

Temperature control range : Room temperature to -70 ℃ (room temperature ≤ 25 ℃）
Temperature accuracy : ± 0.3 ℃
Impact speed : 0℃ to -30℃ around 2.5 ℃/min '-30℃ to -40℃ around 2.5 ℃/min '-40℃ to -70℃ around 2.0 ℃/min
Max dimension L × W × H : 910 × 510 × 860 mm

Add to compare Catalog

Rockwell hardness meter TRHM-A10

Preliminary test force : 98 N
Total test force : 588, 980, 1471 N
Total test force dwell time : 0 to 30 S
Hardness indication : Analogue display

Add to compare Catalog

Rockwell hardness meter TRHM-A11

Preliminary test force : 98 N
Total test force : 588, 980, 1471 N
Total test force dwell time : 1 to 30 S
Hardness indication : Digital display

Add to compare Catalog

Rockwell hardness meter (motorized type) TRHM-B10

Preliminary test force : 98 N
Total test force : 588, 980, 1471 N
Brinell hardness test : 306, 613, 1839 N
Vickers hardness test : 294, 588, 980 N

Add to compare Catalog

Digital low load Vickers Hardness tester TDVH-A10

Test force : 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N
Hardness value symbol : HV1, HV5, HV10, HV20, HV30, HV250
Error range in display : ± 3.0 %, ± 2.0 %
Hardness indication : Digital display

Add to compare Catalog

Digital Brinell hardness Tester TDBH-A10

Test force : 612.5 N, 980 N, 1225 N
Brinell hardness test : 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N
Hardness measuring area : 8 to 650 HBW (hard metals steel ball)
Hardness indication : Digital display

Add to compare Catalog