Atomic Fluorescence Spectrometer : Atomic Fluorescence Spectrometer LAFS-A10


Share :



Atomic Fluorescence Spectrometer LAFS-A10 is a microprocessor controlled double-channel, non-dispersive unit used for trace element composition, ultra-trace analysis of Mercury and all other hydride-forming elements. Pre adjusted referral optical plane to coincide atomizer center with optical focus. Equipped with a feature of real time conversion of data into graph.



Available Range :

Beam Configuration : Dual Channel
Beam ConfigurationDual Channel
Elements ( Measuring Range )
As, Se, Pb, Bi, Sb, Te, Sn< 0.01 µg/L
Hg, Cd< 0.001 µg/L
Zn< 1.0 µg/L
Ge< 0.1 µg/L
Precision ( RSD )< 1.0
Linear rangeMore than 3 orders of magnitude
LampHollow cathode lamp
Power Supply220 V
Dimension1000 x 350 x 390 mm
Weight70 Kg
  • Double channel detection for trace element analysis
  • Peak height and peak area integral detection method
  • High stability light source
  • High intensity hollow cathode lamps for high sensitivity and stability
  • Gas - liquid separator for improved repeatability of results
  • Double shielded quartz atomizer with automatic igniting argon – hydrogen flame
  • Stable gas flow
  • Automatic gas alarm pressure at critical point
  • USB communication for real time automatic detection

Auto injector AU-A10 is used with atomic fluorescence spectrometer for steady, quick and accurate auto injection. It has a configuration of around 120-position injectors with a volume of 10 ml.

Features :
  • Auto zero reset for the robotic arm
  • 3D robotic arm with 3D locating deviations within a range of 0.1 mm
  • Auto- identification of auto injector when software is turned on
  • 120-injector disc with 10 ml of standard tube ( array of 15 x 8 )
  • Zero reset cleaning position with minimum degree location of accumulation error
  • Short auto-injector location time ( X and Y axis move at the same time )
  • No injection drip
  • Stable, fast and accurate low noise operation
  • UV on-line digestion device upgradation available
    Used in analysis / detection of compound present in air of water, heavy metal detection, redirect photons , in various fields of geology, metallurgy, medicine, chemical industry, food inspection, water supply, waste water treatment and scientific research.

    ICP Spectrometer

    ICP Spectrometer : ICP spectrometer LICP-A10

    ICP spectrometer LICP-A10

    • Wavelength range ( 3600 lines / mm )
    • 180 to 500 nm
    • Wavelength range ( 2400 lines / mm )
    • 180 to 800 nm
    • Temperature
    • 20 ~ 28 °C
    ICP Spectrometer : ICP Spectrometer LICP-A11

    ICP Spectrometer LICP-A11

    • Wavelength range
    • 180 to 900 nm
    • Elements per minute
    • 15 elements
    • Temperature
    • 29 °C
    ICP Spectrometer : ICP Spectrometer LICP-B10
    ICP Spectrometer LICP-B10
    • Monochromator Specifications
    • Czerny turner
    • Solid State Power Specifications
    • 27.12 MHz Frequency stability: < 0.05%
    • Technical Specifications
    • Liquid sample: 0.01 ppm to several thousand ppm Solid or power sample: 0.001% to 70%

    XRF Spectrometer

    XRF Spectrometer : XRF-Spectrometer LXRF-A10

    XRF-Spectrometer LXRF-A10

    • Measureable elements
    • S to U
    • Detection limit
    • 1 ppm
    • Temperature
    • 15 ~ 30 °C
    XRF Spectrometer : Handheld XRF Spectrometer LXRF-B10

    Handheld XRF Spectrometer LXRF-B10

    • Analytical Method
    • Energy dispersive X-ray fluorescence analytical Method
    • Elements Measuring
    • Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured
    • Range
    • Simultaneous detector
    XRF Spectrometer : Handheld XRF Spectrometer LXRF-B11
    Handheld XRF Spectrometer LXRF-B11
    • Analytical Method
    • Energy dispersive X-ray fluorescence analytical Method
    • Elements Measuring
    • Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured
    • Range
    • Simultaneous detector