Share :
Portable 2 in 1 gas detector LPTG-A10 is a lightweight, hand held design gas detector. It synchronously detects concentration of CO2 gas and that of another gas like O2, CO, NH3, and H2S. LCD display shows real time measurement values. Used in field detection of multiple gases for quality testing and research purpose.
Available Range :
Measurement principle : Non-dispersive infrared (NDIR) Sampling method : Diffusion Sampling method : Diffusion Sampling : With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection Sampling Method : Diffusion Gas detected : NO2| Sampling method | Diffusion |
| Sensor type | CO2: solid electrolyte sensor, O2：electrochemical sensor |
| Detection range | CO2：0.04 to 5.00 % and O2：0.0 to 30.0 % |
| Detection accuracy | CO2：± 30 % rdg (rdg = reading) and O2：± 3 % F.S. (F.S. = full scale) |
| Display resolution | CO2：0.01 % and O2：0.1 % |
| Calibration | CO2：0.04 % revise the zero point outdoors, O2：20.9 % revise the zero point outdoors |
| Display | LCD display |
| Battery shelf life | About 20 hours (when using alkaline dry batteries) |
| Operation temperature | -10 to 50 °C |
| Operation humidity | < 90 % RH (non-condensation) |
| Power supply | #5 dry cell, 4/AC 100 to 250 V |
| Dimension Host Machine (W*D*H) | 76 × 27 × 145 mm |
| Dimension Detector (W*D*H) | 28 × 27 × 170 mm |
| Weight | About 250 g (includes detector, batteries) |
| HS Code | 9027100090 |
- Equipped with two different types of sensors
- Synchronous detection of two gases at a time
- Long probe for narrow room
- Small volume, Easy to carry
- Automatic self calibration
Used in bio fuel plants, greenhouse, agriculture, construction, for on field testing of chemical gases and others.
| Gas Detectors | Measurement Gas | Range | Accuracy | Response time |
| LPTG-A10 | O2 and CO2 | O2: 5 to 25 % vol |  ±5%F.S |  ＜20s |
| O2 and CO2 | CO2: 0 to 5 % vol |  ±30%rdg |  ＜10s | |
| LPTG-A10 | SO2 and CO2 | SO2: 0 to 100 ppm |  ±5%F.S |   ＜30s |
| SO2 and CO2 | CO2: 0 to 5 % vol |  ±30%rdg |  ＜10s | |
| LPTG-A10 | CO and CO2 | CO: 0 to 1000 ppm |  ±5%F.S |   ＜30s |
| CO and CO2 | CO2: 0 to 5 % vol |  ±30%rdg |  ＜10s | |
| LPTG-A10 | H2S and CO2 | H2S: 0 to 100 ppm |  ±5%F.S |   ＜30s |
| H2S and CO2 | CO2: 0 to 5 % vol |  ±30%rdg |  ＜10s | |
| LPTG-A10 | NH3 and CO2 | NH3: 0 to 30 % vol |  ±5%F.S |   ＜100s |
| NH3 and CO2 | CO2: 0 to 5 % vol |  ±30%rdg |  ＜10s |
Gas Detectors
Portable Multiple Gas Detector LPMG-A10
- Sampling Method
- Diffusion
- Working conditions
- Temperature -20 to 50°C Pressure 0.9 to 1.1 (standard atmospheric pressure) Humidity 10 to 95 % RH (no dew condensation)
- Explosion proof grade
- Exia II CT3
Portable infrared gas detector LIGD-A10
- Measurement principle
- Non-dispersive infrared (NDIR)
- Gas Detected
- SF6: 0 to 50 ppm range/ 0 to 1000 ppm range (as per req.)
- Detection Uncertainty
Portable Single Gas Detector LPSG-A10
- Sampling method
- Diffusion
- Measurement principle
- Electrochemical (oxygen, toxic gases), Catalytic combustion (flammable gases), Infrared principle (carbon dioxide gas)
- Detector gas
- Flammable gases, oxygen gas, toxic and harmful gases
Handheld C2H4 Ethylene Gas Detector LEGD-A10
- Sampling
- With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection
- Gas
- Ethylene C2H4
- Measure Range
- 0 to 1000 ppm
Digital Differential Pressure Meter
Digital Differential Pressure Meter LDPM-A10
- Measuring range
- 0 ∼ 125 Pa
- Accuracy
- 0 ± 0.2 Pa (liner error) ± 1 %
- Operating temperature range
- 0 °C ∼ 50 °C
Digital Differential Pressure Meter LDPM-A20
- Measuring range
- ± 500 Pa
- Repeatability
- ± 0.2 % FS
- Resolution
- 0.1 Pa
Multifunctional Environmental Meter
6 in 1 Multifunctional Environmental Meter LMEM-A10
- Temperature Measurement Range
- -10℃ to 60℃
- Temperature Resolution
- 0.1°C
- Temperature Accuracy
- ± 1.5℃
Popular Products
Navigation
Contact Us Map