Share :
Dry bath incubator LDBI-A11 is a precise, reliable and easy-to-use product that uses high purity aluminum as a heat conduction medium. It is fitted with a microprocessor controlled system along with digital temperature display, buzzer alarm function and in-built over temperature protection device. In addition, it has a wide temperature range and is available in single, dual and four block models.
Available Range :
Temperature range : RT. 5°C ~ 160°C Temperature range : RT. 5°C ~ 130°C Temperature range : RT. 5°C ~ 100°C Temperature range : RT. 5°C ~ 100°C Temperature control range : RT. (-30) °C - 100°C| Temperature range | RT. 5°C ~ 130°C |
| Temperature accuracy | ± 0.5 °C at 40 °C ; ± 1 °C at 120°C |
| Temperature uniformity | ± 0.5 °C |
| Block quantity | 4 |
| Heating time | ≤ 20 min (25 °C ~ 130 °C) |
| Display accuracy | 0.1 °C |
| Time range | 1 min - 99 hr. 59 min |
| Voltage | 220 V,50 / 60 Hz |
| Power | 600 W |
| Dimension (L x W x H) | 360 x 220 x 100 mm |
| Net weight | 8 kg |
| Gross Weight | 8.0 kg |
- Microprocessor controlled system
- High purity aluminum as a heat conduction medium instead of traditional water bath device
- Real time temperature display
- Mechanized fault detection and buzzer alarm function
- Uncomplicated cleaning, replacement and disinfection of blocks
- In-built over temperature protection device
- More reliable to use with two redundant hardware circuit design
- Wide temperature range
- Highly precise
- User-friendly
- 12-months warranty
| Model | Diameter of test tube | No. of test tubes |
| DBA-01 | 6 mm | 48 |
| DBA-02 | 7 mm | 48 |
| DBA-03 | 10 mm | 24 |
| DBA-04 | 12 mm | 24 |
| DBA-05 | 13 mm | 24 |
| DBA-06 | 15 mm | 16 |
| DBA-07 | 16 mm | 16 |
| DBA-08 | 19 mm | 12 |
| DBA-09 | 20 mm | 12 |
| DBA-10 | 26 mm | 8 |
| DBA-11 | 28 mm | 4 |
| DBA-12 | 40 mm | 3 |
| DBA-13 | 0.2 ml centrifuge tube | 48 |
| DBA-14 | 0.5 ml centrifuge tube | 48 |
| DBA-15 | 1.5 ml centrifuge tube | 24 |
| DBA-16 | 2.0 ml centrifuge tube | 24 |
| DBA-17 | 0.2 ml well micro plate | 96 |
Shaking Incubator
It incorporates advantage of both closed and shaking incubation required for no. of processes which includes tissue culture, enzyme reaction, fermentation etc. It is highly efficient with user-friendly operation.
Shaking Incubator (Stack Type) LSI-D10
- Display
- LCD
- Circulation Mode
- Forced convection
- Shaking Mode
- Rotatory Shaking
Shaking Incubator (Stack Type) LSI-D11
- Display
- LCD
- Circulation Mode
- Forced convection
- Shaking Mode
- Rotatory Shaking
Shaking Incubator LSI-A10
- Shaking Speed Range
- 40 to 300 rpm
- Platform Size
- 280 × 220 mm
- Display Resolution
- 0.1 ℃
Shaking Incubator LSI-A11
- Shaking Speed Range
- 40 to 300 rpm
- Platform Size
- 350 × 350 mm
- Display Resolution
- 0.1 ℃
Cooling Incubator
This wide range of cooling incubators is available in different temperature ranges and it is suitable to serve for preservation of culture medium, serum, medicine as well as micro-organism training and environmental testing, etc.
Heating Incubator
Equipped with inner glass door for easy operation, our heating incubators deliver a higher level of performance for storage and cultivation purpose. This range is available in different chamber volume.
Dry Bath Incubator
Dry bath incubator LDBI-A10
- Temperature range
- RT. 5°C ~ 160°C
- Temperature accuracy
- ± 0.5 °C at 40 °C ; ± 1 °C at 120°C
- Temperature uniformity
- ± 0.5 °C
Dry bath incubator LDBI-A20
- Temperature range
- RT. 5°C ~ 100°C
- Temperature accuracy
- ≤ ± 0.3°C
- Temperature uniformity
- ≤ ± 0.3 °C
Dry bath incubator LDBI-A21
- Temperature range
- RT. 5°C ~ 100°C
- Temperature setting range
- 0 °C - 100 °C
- Temperature accuracy
- ≤ ± 0.3 °C
Dry bath incubator LDBI-A30
- Temperature control range
- RT. (-30) °C - 100°C
- Temperature setting range
- (-10) ℃ - 100 ℃
- Temperature accuracy
- ≤ ± 0.3 °C
Lighting Incubator
Lighting Incubator LLI-A10
- Capacity
- 250 L
- Illumination type
- 2 side illumination
- Light source
- Fluorescent lamp
Lighting Incubator LLI-A11
- Capacity
- 350 L
- Illumination type
- 2 side illumination
- Light source
- Fluorescent lamp
Lighting Incubator LLI-A12
- Capacity
- 450 L
- Illumination type
- 2 side illumination
- Light source
- Fluorescent lamp
Drosophila Incubator
Drosophila Incubator LDRI-A10
- Capacity
- 250 L
- Illumination type
- 3-side illumination
- Illumination source
- Fluorescent lamp
Drosophila Incubator LDRI-A11
- Capacity
- 350 L
- Illumination type
- 3-side illumination
- Illumination source
- Fluorescent lamp
Drosophila Incubator LDRI-A12
- Capacity
- 450 L
- Illumination type
- 3-side illumination
- Illumination source
- Fluorescent lamp
Anaerobic Incubator
Anaerobic Incubator LAI-A10
- Control System
- Microcomputer control system
- Display
- LCD display with button-press keypad
- Time for creating anaerobic state in sample chamber
- < 5 minutes
Anaerobic Incubator LAI-A11
- Control System
- Microprocessor control system + Siemens PLC
- Display
- LCD display with touch screen control panel
- Time for creating anaerobic state in sample chamber
- < 5 minutes
Anaerobic Incubator LAI-B10
- Time for creating anaerobic state in sample chamber
- < 5 min
- Time for creating anaerobic state in operation chamber
- < 1 hour (Oxygen concentration ≤ 1%)
- Anaerobic environment maintenance time
- > 12 h (when no supply of mixed gas)
Portable Incubator
Portable Incubator LPI-A10
- Air cycle Mode
- Gravity air convection
- Function
- RT +5 to 50 ℃
- Body structure
- Mirror stainless steel
Portable Incubator LPI-A11
- Air cycle Mode
- Natural air convection
- Function
- RT +5 to 80 ℃
- Body structure
- Stainless steel
Portable Incubator LPI-A12
- Air cycle Mode
- Natural air convection
- Function
- RT +5 to 250℃
- Body structure
- Stainless steel
Popular Products
Navigation
Contact Us Map