Temperature and Humidity Test Chamber : Temperature and Humidity Test Chamber LTHC-B30


Share :


Temperature and Humidity Test Chamber LTHC-B30

Temperature and Humidity Test Chamber LTHC-B30 designed with 3150 L internal capacity volume. Structured with -40°C to 150°C temperature range, and 10% to 98% RH humidity range to stimulate constant temperature and humidity conditions for testing wide variety of products for their quality, performance, shelf life and stability. The front panel features LCD screen, separate indicator lamp meant for high and low water level, emergency stop button, water level indicator, besides design also offers stainless steel durable door with glass window, 02 pcs of adjustable stainless steel shelves, 1 pc of 100 mm diameter hole, castors at base for easy movement of the unit. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.


Available Range :

Capacity : 50 L Capacity : 80 L Capacity : 100 L Capacity : 225 L Capacity : 500 L Capacity : 800 L
Capacity3150 L
Temperature range-40℃ to 150℃
Temperature cooling rate1℃ / min
Temperature heating rate1℃ / min
Temperature fluctuations± 0.5℃
Temperature deviation± 2.0℃
Heating Power1000 W
Humidity range10% to 98% RH
Humidity deviation± 2.5 % RH
Cooling systemFrench TECUMSEH Compressor, R449A, R508B Refrigerant, Mechanical compression refrigeration system
Heating ElementNichrome Wire
DisplayPID Touch color LCD screen controller
HumidityAutomatic water supply, water purification system, Humidification: Stainless steel surface evaporation humidifier, external evaporation, Dehumidification: Evaporator
Temperature sensorPT-100 platinum resistance, A class, Temperature sensor
Humidity sensorDry and wet bulb sensor
Built-in water tank270×300×450 mm
View window size330×370 mm
Air circulationCentrifugal wind fan
Thermal insulation10 cm Polyurethane foam and insulation cotton
Exterior MaterialSteel plate with protective coating
Interior MaterialSUS304 stainless steel
Standard configuration1 cable hole (50 mm diameter) with plug, 02 adjustable shelves
Power supply380 V, 50 Hz
Maximum Noise65 dBA
External Environmental condition5°C to 35°C, ≤ 85% RH
Internal dimension (D×W×H)1500×1500×1400 mm
Overall dimension (D×W×H)2050×2050×2350 mm
  • Structured with -40°C to 150°C temperature range, and 10% to 98% RH humidity range
  • Easy to use LCD touch screen controller and a graphic display to allow monitoring of the set and actual working parameters
  • 304 stainless steel, rust-proof interior chamber material with mirror surface
  • 02 pcs of adjustable stainless steel perforated shelves for good air circulation
  • Standard 50 mm diameter test cable hole located on left side of the workroom with inside sleeve to prevent moisture, and soft silicone plug seal
  • Double layer 8 cm insulating tempered glass window, prevents frosting, built-in LED light of work room helps in clear observation of sample through window
  • PID microprocessor colour touch screen controller
  • Good water circulation system, yearly replacement of filter
  • Automatic water inlet, with 13.5 mm diameter, standard 2 meter drain
  • High and low water level alarm, water shortage lights and sound
  • A3 steel plate with galvanized coating
  • Ethernet of PC link, USB to download test data, editing of 120 programs 100 segment
  • Four casters with brakes, and adjustable height, for easy movement
  • 10 cm thick polyurethane foam and insulation cotton for better performance
Temperature and Humidity Test Chamber used in basic and advanced research, quality and stability testing across pharmaceutical and cosmetic industries, chemical industry, packaging industry, food and beverage industry.
Wet wick for humidity sensor- 1 pc
Relay- 2 pc
PT-100 Temperature sensor- 2 pc
High and low water level float- 2 pcs
Heating tube- 1 pc

Drug Test Chamber

Drug test chambers are designed to conduct stability and shelf life studies on drug and drugs components.

Drug Test Chamber : Drug Stability Test Chamber LDST-A10

Drug Stability Test Chamber LDST-A10

  • Volume
  • 150 L
  • Temperature Range
  • 0 - 65 °C
  • Temperature Fluctuation
  • ± 0.5 °C
Drug Test Chamber : Drug Stability Test Chamber LDST-A11

Drug Stability Test Chamber LDST-A11

  • Volume
  • 250 L
  • Temperature Range
  • 0 - 65 °C
  • Temperature Fluctuation
  • ± 0.5 °C
Drug Test Chamber : Drug Stability Test Chamber LDST-A12
Drug Stability Test Chamber LDST-A12
  • Volume
  • 500 L
  • Temperature Range
  • 0 - 65 °C
  • Temperature Fluctuation
  • ± 0.5 °C
Drug Test Chamber : Drug Stability Chamber with Illumination LDST-B10
Drug Stability Chamber with Illumination LDST-B10
  • Volume
  • 150 L
  • Temperature Range(without illumination)
  • 0 - 65 °C
  • Temperature Range(with illumination)
  • 10 °C - 65°C

Ozone Test Chamber

Labtron offers ozone test chambers which can simulate ozone atmospheric conditions to be used for aging cracking test of non-metal materials and rubber products, to determine the anti-ozone properties of the products.

Ozone Test Chamber : Ozone Test Chamber LOC-A10

Ozone Test Chamber LOC-A10

  • Temperature range
  • 0℃ ~ 100℃
  • Humidity range
  • 30 % - 98 % R.H
  • Temperature fluctuation
  • ± 0.5 ℃
Ozone Test Chamber : Ozone Test Chamber LOC-A11

Ozone Test Chamber LOC-A11

  • Diameter of holder (mm)
  • 400
  • Length of each side (mm)
  • 180
  • Temperature range
  • 0℃ ~ 100℃
Ozone Test Chamber : Ozone Test Chamber LOC-A12
Ozone Test Chamber LOC-A12
  • Diameter of holder (mm)
  • 600
  • Length of each side (mm)
  • 220
  • Temperature range
  • 0℃ ~ 100℃
Ozone Test Chamber : Ozone Test Chamber LOC-A13
Ozone Test Chamber LOC-A13
  • Diameter of holder (mm)
  • 700
  • Length of each side (mm)
  • 350
  • Temperature range
  • 0℃ ~ 100℃

Plant Growth Chamber

Labtron’s plant growth chamber is designed with accurate control of temperature, light, humidity, CO2 and other environmental factors which are necessary for plant growth. These chambers are helpful for researchers to carryout different experiments on plants without any dependency on climatic factors.

Plant Growth Chamber : Plant Growth Chamber LPGC-A10

Plant Growth Chamber LPGC-A10

  • Chamber Volume
  • 300 L
  • Shelves
  • 3(PCS)
  • Display Resolution
  • 0.1 ℃
Plant Growth Chamber : Plant Growth Chamber LPGC-A11

Plant Growth Chamber LPGC-A11

  • Chamber Volume
  • 450 L
  • Shelves
  • 3(PCS)
  • Display Resolution
  • 0.1 ℃
Plant Growth Chamber : Plant Growth Chamber LPGC-A12
Plant Growth Chamber LPGC-A12
  • Chamber Volume
  • 800 L
  • Shelves
  • 3(PCS)
  • Display Resolution
  • 0.1 ℃
Plant Growth Chamber : Plant Growth Chamber LPGC-A13
Plant Growth Chamber LPGC-A13
  • Chamber Volume
  • 1000 L
  • Shelves
  • 3(PCS)
  • Display Resolution
  • 0.1 ℃

Salt Spray Test Chamber

Labtron offers wide range of salt spray corrosion test systems with ability to test the corrosive resistant of products. Our user friendly products suit our clients' requirement and hence, continue to be in demand.

Salt Spray Test Chamber : Salt Spray Test Chamber LSSC-A10

Salt Spray Test Chamber LSSC-A10

  • Testing room capacity
  • 110 L
  • Temperature range
  • Ambient to +60°C
  • Humidity range
  • 95 to 98% RH
Salt Spray Test Chamber : Salt Spray Test Chamber LSSC-A11

Salt Spray Test Chamber LSSC-A11

  • Testing room capacity
  • 326 L
  • Temperature range
  • Ambient to +60°C
  • Humidity range
  • 95 to 98% RH
Salt Spray Test Chamber : Salt Spray Test Chamber LSSC-A12
Salt Spray Test Chamber LSSC-A12
  • Testing room capacity
  • 410 L
  • Temperature range
  • Ambient to +60°C
  • Humidity range
  • 95 to 98% RH
Salt Spray Test Chamber : Salt Spray Test Chamber LSSC-A13
Salt Spray Test Chamber LSSC-A13
  • Testing room capacity
  • 780 L
  • Temperature range
  • Ambient to +60°C
  • Humidity range
  • 95% to 98% RH

Sand Test Chamber

In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.

Sand Test Chamber : Sand and Dust Test Chamber LSC-A10

Sand and Dust Test Chamber LSC-A10

  • Temperature range
  • Ambient to + 50 ℃
  • Relative Humidity
  • < 30 % RH
  • Normal wire diameter
  • 50 um
Sand Test Chamber : Sand and Dust Test Chamber LSC-A11

Sand and Dust Test Chamber LSC-A11

  • Temperature range
  • Ambient to + 50 ℃
  • Relative Humidity
  • < 30 % RH
  • Normal wire diameter
  • 50 um
Sand Test Chamber : Sand and Dust Test Chamber LSC-A12
Sand and Dust Test Chamber LSC-A12
  • Temperature range
  • Ambient to + 50 ℃
  • Relative Humidity
  • < 30 % RH
  • Normal wire diameter
  • 50 um
Sand Test Chamber : Sand and Dust Test Chamber LSC-A13
Sand and Dust Test Chamber LSC-A13
  • Temperature range
  • Ambient to + 50 ℃
  • Relative Humidity
  • < 30 % RH
  • Normal wire diameter
  • 50 um

Temperature and Humidity Test Chamber

Labtron offers temperature and humidity test chambers which are used in various industries to test large equipments such as automotive parts by controlling the temperature and humidity. It is highly stable and provides enough space to work.

Temperature and Humidity Test Chamber : Temperature and Humidity Test Chamber LTHC-A10

Temperature and Humidity Test Chamber LTHC-A10

  • Capacity
  • 50 L
  • Temperature range
  • (- 20 °C) to 150 °C
  • Low type
  • I – 40 °C, II – 70 °C
Temperature and Humidity Test Chamber : Temperature and Humidity Test Chamber LTHC-A11

Temperature and Humidity Test Chamber LTHC-A11

  • Capacity
  • 80 L
  • Temperature range
  • (- 20 °C) to 150 °C
  • Low type
  • I – 40 °C, II – 70 °C
Temperature and Humidity Test Chamber : Temperature and Humidity Test Chamber LTHC-B10
Temperature and Humidity Test Chamber LTHC-B10
  • Capacity
  • 100 L
  • Temperature range
  • (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
  • Temperature cooling rate
  • 1 ℃ / min
Temperature and Humidity Test Chamber : Temperature and Humidity Test Chamber LTHC-B11
Temperature and Humidity Test Chamber LTHC-B11
  • Capacity
  • 225 L
  • Temperature range
  • (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
  • Temperature cooling rate
  • 1 ℃ / min

UV Test Chamber

We manufacture UV test machine to simulate sunlight alongwith condenser and water spray system to simulate rain and dew. These chambers are used in various industries to detect the damage caused by environmental factors.

UV Test Chamber : UV Test Chamber LUVC-A10

UV Test Chamber LUVC-A10

  • UV Temperature
  • 50 °C to 75 °C
  • Testing Capacity
  • 48 piece (75 x 150 mm); 50 piece (75x 150 mm)
  • Weight
  • 136 kg
UV Test Chamber : UV Test Chamber LUVC-A20

UV Test Chamber LUVC-A20

  • Temperature Range
  • RT + 100 °C ~ 850 °C
  • Humidity range
  • At 400 °C: R.H. is 40 % ~ 85 % / At 800 °C: R.H. is 30 % ~ 50 %
  • Testing Time
  • 20 hours
UV Test Chamber : UV Test Chamber LUVC-A21
UV Test Chamber LUVC-A21
  • Temperature Range
  • RT + 100 °C ~ 630 °C
  • Humidity range
  • 30 % ~ 85 % RH
  • Testing Time
  • 20 hours

Xenon Test Chamber

We manufacture Xenon test chambers which consist of xenon lamp to simulate environmental factors to test its effect on products. It is widely used in research, product development and quality control.

Xenon Test Chamber : Xenon Test Chamber LXC-A10

Xenon Test Chamber LXC-A10

  • Bandwidth Measurement (nm)
  • 280 ~ 800
  • Specimen Capacity (pcs)
  • 28
  • Specimen holder size (mm)
  • 80 × 15
Xenon Test Chamber : Xenon Test Chamber LXC-A11

Xenon Test Chamber LXC-A11

  • Bandwidth Measurement (nm)
  • 300 - 420
  • Specimen Capacity (pcs)
  • 34
  • Specimen holder size (mm)
  • 80 × 15
Xenon Test Chamber : Xenon Test Chamber LXC-A20
Xenon Test Chamber LXC-A20
  • Bandwidth Measurement (nm)
  • 280 ~ 800
  • Specimen Capacity (pcs)
  • 28
  • Specimen holder size (mm)
  • 80 × 15
Xenon Test Chamber : Xenon Test Chamber LXC-A21
Xenon Test Chamber LXC-A21
  • Bandwidth Measurement (nm)
  • 300 - 420
  • Specimen Capacity (pcs)
  • 34
  • Specimen holder size (mm)
  • 80 × 15

Popular Products

 

Navigation

Contact Us Map