Water Purifier LWPUR-A11

https://www.labtron.info/ | info@labtron.info

Description :

Water Purifier LWPUR-A11 is a system having an output capacity of 30 L/hr and a flow rate of 2 L/min. It provides both RO and ultrapure water for various laboratory needs. Advanced technology, easy installation procedure, water storage in tank (option), etc. are some of the features which ensures good water quality and required output. It finds applications in several laboratory, hospital, industrial operations.

Specifications :

Output (25°C)

30 Litres/hour

Flow rate

Up to 2 litres/minute (with pressure tank)

Pure water outlet

1 : reverse osmosis water

RO water quality

Ion rejection rate	Organics rejection rate	Particles and bacteria rejection rate	Bacteria	Particle( >0.1μm)
96 to 99 % (with new RO membrane)	> 99 % (when MW > 200Dalton)	> 99%	< 0.1 cfu/ml (with optional 0.45+0.1 μm PES terminal filter)	< 1/ml (with optional 0.45 + 0.1 μm PES terminal filter)

Pure water quality

Desalination rate	TDS	Resistivity	Conductivity	Pure water outlet
Nearly 100 %	RO water: 5 to 10 ppm	15-18 MΩ.cm	0.067 to 0.055 µs/cm	RO water, deionized water

Purification System

Pre-treatment unit	RO unit	Subsequent Unit
Special spun fibre cartridge Special active carbon block cartridge Special active carbon block cartridge	100GPD RO membrane ×2	Mixed bed resin cartridge ×3

Working Environment

Inlet water	Feed water requirements
Tap water (TDS < 200ppm will be suggested). If inlet water TDS >200 ppm, pre-treatment is recommended. Water with higher TDS will affect the quality of outlet water and life of purification cartridge.	For Tap water; temperature: 5 to 45℃, pressure: 1.0 to 4.0 Kgf/cm²

Other Details

Control System	Standard configuration	Electrical requirements	Power	Dimension (L× W × H)	Weight
Automatic electronic pressure sensor, automatic stop without water, automatic cutting off if pump stops, RO membrane auto flushing , automatic stop when water tank full, Guarantees 24 hr work	Main body (Including 1 set of cartridge) + 4.0 gallon water tank + TDS/conductivity test pen	AC 110 to 240 V, 50/60 Hz	72 W	410×220×420 mm	about 16 kg

Features :

Supplies Type 1 (ultra-pure) and Type-3 (RO) water
Spun fiber and active carbon block cartridge, 100 GPD RO membrane
Includes TDS/conductivity pen
4 gallon water tank
Auto power on and off according to water outflow and inflow
Compact Design

Applications :

It is used to prepare ultra-pure and RO water. RO water is used in general biology experiments, agricultural experiments, ware washing, as an inlet for ultra-pure water etc. while ultrapure water is used in steam generators, injection water in healthcare, microanalysis, etc.

www.labtron.info

Labtron Equipment Ltd. Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom

Email: info@labtron.info | Website: https://www.labtron.info/ | Phone: +44 2080 043 608